Sangean RCR-1 - Manual (Page 15)

14
GB
Using Alarm with HWS Alarm Beep
Select alarm system 1 or 2 by pressing the alarm button [14] or [15].
Display will blink with selected alarm Press alarm set button [16]
Display will blink showing selected alarm hour and alarm mode
and beep
Press alarm Mode button [20] to select alarm mode
Use + or – button [18] to set alarm time hours.
Press set button [16] to set minutes using + or – button to
set minutes
Press alarm days selections 1-7 (Sunday-Saturday) to select
alarm days.
Display will show the days on which you wish to be awoken by the
buzzer humane alarm
Pressing alarm button 1 or 2 will confirm settings and a beep and
display indicates buzzer humane alarm is set.
Note:
If alarm days or alarm mode are not selected display will blink
all the days for a few seconds indicating the alarm is not set
and the alarm will not be activated.