Sangean RCR-1 - Manual (Page 18)

17
TIME ZONE SWITCH
Time Zone Switch [10] should be set to zone where clock/radio is to
be used.
TROUBLESHOOTING/RESET
If the radio fails to operate correctly or some of the digits on the
display are missing or incomplete the following may correct the
problem:
Using a suitable implement (the end of a paper clip), press the
RESET button [11] for a few seconds. This will reset the
microprocessor, clock time and clear all the stations stored in preset
memory.
TECHNICAL DATA
Power Supply 110-120 Volt/50-60 Hz, 800mW max
Frequency Coverage FM 87.50 - 108.0 MHz
AM 520 - 1710 kHz