Sony PMW-F3K - Manual (Page 77)

Picture Profiles 77
Record
ing
Knee
Adjusting the knee level
Setting
On / Off
Set to “On” to compress the high-luminance area of
the picture.
Note
Knee is fixed and cannot be changed in the
following cases:
• When Gamma is set to CINE1 to 4
• When the electronic shutter is in Slow Shutter
mode
Auto Knee
On / Off
Set to “On” to automatically set the best knee
conditions according to the luminance level of the
picture.
With “Off” the knee conditions can be manually
adjusted independently of the luminance level of
the picture.
Point
50 to 109 (90)
Set the knee point when Auto Knee is “Off.”
Slope
–99 to +99 (±0)
Set the knee slope (volume of compression) when
Auto Knee is “Off.”
Knee SAT Level
0 to 99 (50)
Adjust the knee saturation level for the area over
the knee point.
Gamma
Adjusting the gamma
compensation level and
selecting the gamma curve
Level
–99 to +99 (±0)
Adjust the gamma compensation level.
Select
STD1 DVW / STD2
×4.5 /
STD3
×3.5 / STD4 240M /
STD5 R709 / STD6
×5.0 /
CINE1 / CINE2 / CINE3 /
CINE4
Select the type of reference curve for gamma
compensation.
STD1 DVW: DVW camcorder equivalent
STD2
Ч
4.5:
Ч
4.5 gain
STD3
Ч
3.5:
Ч
3.5 gain
STD4 240M: SMPTE-240M equivalent
STD5 R709: ITU-R709 equivalent
STD6
Ч
5.0:
Ч
5.0 gain
CINE1: This smoothes the contrast in darker areas
and accentuates gradation changes in brighter
areas, for a calm and quiet effect (F35
HG4609G33).
CINE2: This gives almost the same results as
CINE1. Select this when you wish to obtain
100% video signals for editing or other purposes
(F35 HG4600G30).
CINE3: This emphasizes the contrast between light
and dark more than CINE1 and CINE2, and also
accentuates gradation changes on the black side.
CINE4: This emphasizes the contrast in dark areas
more than CINE3. Contrast in dark areas is
weaker and contrast in bright areas is stronger
than STD curves.
Note
When the camcorder is in SD mode, the default
setting is “STD4 240M.”
Black
Adjusting the black
–99 to +99 (±0) Adjust the master black level.
P. PROFILE SET
Items Subitems and setting values Contents