Solid State Logic 82BXEM01A User Manual
Page 11
7
Note that it is possible to globally switch the FX Sends independently for the X-Panda
to source the signal pre fader by engaging the “PRE” switch for either of the two FX
Send busses on the last X-Panda Stereo Channel.
Channel Balance, Fader, Cut & Solo
At the end of the Stereo Channel there is a Balance control. Note
that this is entirely different to the Pan control on the Mono
channels. Simply, it controls the channels respective Left/Right
Level feed to the Stereo Mix Bus. If you are unfamiliar with this
type of control it may be worth playing some stereo material into
the channel and experimenting with the control to perhaps give you
an idea of it creative potential.
In addition to the usual Solo and Cut switches along with a long
throw Channel fader, all of which function as they do on the Mono
channels.