Solid State Logic 82BXEM01A - Manual (Page 13)

9
Using X-Panda with an X-Rack Summing System
Although not essential, a natural partner for the X-Panda is an SSL X-Rack. While
some of the more obvious X-Rack modules such as the Mic Amp (XR621) or the
VHD Input modules (XR627) would be suitable for recording various sources, and of
course the X-Rack EQ and Dynamics modules, Superanalogue (XR625) & (XR618)
or 4000 series (XR425) & (XR418) would be a natural partner for audio processing
duties.
However the real fun begins if you would like to create a “bigger” analogue mixer.
Because the X-Rack has a “Mix Bus Link”, if you have a Master Bus Module
(XR622) simply connect the X-Panda’s “XRACK EXPANSION” to the X-Racks’
“Mix Bus Link”
Note: The X-Rack REC BUS (Record Bus) is fed from the X-Panda’s ST CUE as it
has no associated bus.
Using X-Panda with other audio equipment
While you may assume that X-Panda is designed to only work in conjunction with
other SSL equipment, you would be mistaken. X-Panda can be a welcome addition to
any existing set up.
Use with another audio mixing console:
Lets assume you have a classic console from the good old days, or a highly affordable
offering from a current manufacturer. X-Panda allows you to add additional inputs for
this device. Simply connect from the Unite socket on the rear of the X-Panda to your
audio console. Remember that you can “break out” the 8-way D-sub (Using a
commonly available D-Sub to 8x XLR cable for example) into its component audio
signal elements. So you can access the Stereo MIX bus, Cue bus the two Mono FX
Sends and of course, the AFL bus. You do not have to use all of these of course. SSL
are providing you with a set of tools, and as ever you choose the correct one for the
job. A simple setup would involve simply connecting the X-Panda MIX bus to a
Stereo Input or indeed two mono channels. This would provide many more inputs into
your console. A more complex set up might involve the above in combination with
the CUE and FX also connected. Useful if you wish to access hardware outboard FX
equipment that is connected to the other mixing console. How you accomplish this on
your other console will either involve donating a channel for this purpose or some
have dedicated summing input often called Bus injects. Consult the documentation
that came with your other audio mixer to see what is possible and how it might work
best for you in your studio. No two mixers are alike!
Use with another analogue summing system:
The last few years has seen a growing appreciation for the benefits of analogue mix
summing. There are quite a few systems available and X-Panda can work in
conjunction with any of them.