Sony XES - Manual (Page 54)

52
Additional Settings
Additional Settings
Sub Menu item Function
Contrast Selects 1 of 15 contrast levels for the display.
Select “Contrast,” then press the ENTER
button. You can change the current setting by
using the ? or / button. Press the ENTER
button again to change the setting.
Display Select “off” to turn off the display. After you
exit the menu operation and five seconds
elapse, the display turns off automatically.
Press any button on the wireless remote or on
the display section to turn the display back
on.
When ACC Position is set to “no” (see page
12), the display does not turn off even if you
set Display to “off.”
Font Style Select the font style on the display. You can
select “Regular” or “Bold.”
Clock Select “on” to display the current time in the
upper-right corner of the display at all times.
If you select “off,” the time is displayed only
when the system is turned off. Select “Time
Set” to set the clock (see page 14).
Beep Specifies whether a beep sounds when an
operation button is pressed.
Rotary Remote Reverses the rotational direction of the rotary
remote for controlling operations. Select
“normal” for increasing volume, frequency,
track numbers, etc. by rotating the control
clockwise; select “reverse” for increasing the
same parameters by rotating the control
counterclockwise.
SEEK/AMS Switches the SEEK/AMS control function of
the rotary remote. Select “SEEK/AMS” for
normal use (see page 8). If you select “Item
sel,” rotating the SEEK/AMS control selects
an item in the list.