Sony XES - Manual (Page 57)

Additional Settings 55
Additional Settings
Selecting the Parametric Equalizer
Pattern
You can use the built-in parametric equalizer to customise
the sound characteristics to suit the acoustics of your car
by adjusting the median frequency, level, and slope (Q, or
the extent of each characteristic) of each band.
You can select a parametric equalizer pattern for each
programme source from the 10 patterns that are included
in the system’s memory.
1
Press SOUND on the rotary remote to display
the Parametric EQ list.
Each press of the button changes the display as
follows: Parametric EQ list n Cross-over Network
list n previous display.
6.MEMORY 6
7.MEMORY 7
8.MEMORY 8
9.MEMORY 9
10.MEMORY10 1.MEMORY 1
2.MEMORY 2
3.MEMORY 3
4.MEMORY 4
5.MEMORY 5
Parametric EQ
2
With the list displayed, rotate VOL/DISC/
PRESET on the rotary remote to select a
preset pattern.
After appearing for 10 seconds, the list is replaced by
the normal display.
Source sound memory
The parametric equalizer pattern is memorised in the
system for each programme source, and is activated
whenever you select that source thereafter. Turning off
power has no effect on the memorised settings.
Useful tips
To change the contents
of the preset parametric
equalizer patterns,
consult your Sony
dealer.