Siemens Gigaset 3000 Classic - Manual (Page 7)

7
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm 05.01.00
Charging the batteries
The batteries supplied are not charged.
To charge the batteries, insert the handset in the base sta-
tion or Gigaset 3000L charging unit (accessory) – you will
hear the confirmation beep. The charging status icon flashes
on the handset display to indicate that a charging operation
is in progress:
Approved batteries:
Always replace both batteries and only use batteries of the
same type/from the same manufacturer.
§
Batteries empty
¥
Batteries 2 /
3
charged
¦
Batteries 1 /
3
charged
¤
Batteries full
– We recommend initially charging the batteries for at least
16 hours without interruption – irrespective of the
charging status icon.
– Once the first charging operation is complete, you can
replace the handset in the base station after every call.
Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
– The batteries heat up during charging.
– The battery charging status is only displayed correctly
after uninterrupted charging/discharging. You should
therefore avoid opening the battery compartment unne-
cessarily.
Nickel-cadmium (NiCd) Nickel-metal-hydride (NiMH)
Sanyo N-3U (700 mAh) Sanyo H-3 U (1500 mAh)
GP GP60AAKC (600 mAh) GP GP130 AA HC (1300 mAh)
Varta 751RS (700 mAh) GP GP150 AA HC (1500 mAh)
Mobile Power 700 (700 mAh) Varta VH 1101 or Phone Power
(1100 mAh)
Panasonic 60 DT (600 mAh) Panasonic HHR-110 AA (1100 mAh)
Friwo NiMH (1400 mAh)
Toshiba TH-1200 AARE (1200 mAh)
3000Cla-IM1-2-en.bk Seite 7 Mittwoch, 5. Januar 2000 3:31 15