Siemens Gigaset 3000 Classic - Manual (Page 9)

9
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm 05.01.00
Registering the handset
You must register your handset at the base station before
you can start to make calls.
Step 1
• First prepare the Siemens base station for registration:
Step 2
• You now have one minute to enter the following at the
handset:
z { ~ Press the keys shown.
¸b
Enter the base station number, e.g. ¸ (sta-
tion 1-4) and confirm.
System PIN
b Enter the base station’s system PIN and con-
firm (factory setting: 0000) – the unassigned
call numbers appear after a few seconds.
e.g. s Enter the desired call number – the statio-
nary base icon

is displayed.
Your handset is ready for operation!
Gigaset Base station preparation
3010/pocket
3015 Hold down the coloured base station key for
approx. 10 seconds until you hear signal
tones.
3020, 3025
3030, 3035 In the base station menu select registration
option and confirm.
ISDN
models Press the display (LED) –
flashing during registration.
1000/2000
models As for relevant successor model.
– Please refer to the relevant operating instructions (step 1)
to register at non-Siemens base stations.
– You can register your Gigaset 3000 Classic handset at
up to 4 different base stations, see above.
3000Cla-IM1-2-en.bk Seite 9 Mittwoch, 5. Januar 2000 3:31 15