Sony 500WSPL - Manual (Page 44)

Chapter 2 Fitting and Connections
44
Chapter 2 Fitting and Connections
VTR
VIDEO OUT
VIDEO OUT
GEN LOCK IN
VIDEO OUT
GEN LOCK IN
VIDEO OUT
GEN LOCK IN
Example 1: Camcorder 2 synchronized
to the signal from camcorder 1
Camcorder 1
DSR-500WSL/500WSPL
CCZ-A Camera Cable BNC cable
Portable VCR
To camera
connector To video input
connector
Camcorder 2
DSR-500WSL/500WSPL
Example 2: Camcorders 1 and 2 synchronized to the signal from a special effects unit or similar
Special effects
unit or similar
Video input connector BNC cable
Sync signal output
connector
DSR-500WSL/500WSPL
BNC cable
Video input connector BNC cable
Camcorder 2
Camcorder 1
DSR-500WSL/500WSPL
Sync signal output
connector BNC cable
BNC cable
Connections
Connecting a Number of Camcorders
When using two or more synchronized camcorders,
connect an external sync signal to the GEN LOCK IN
connector, supplying a VBS or BS signal. The
camcorder will then operate synchronized to this
signal.
You can adjust the synchronization using the basic
menu. (See page 81.)
Note
When you fit the optional DSBK-501/501P, set the
VIDEO IN to CAM using the basic menu page 4. (See
page 81.)