Siemens 600Series - Manual (Page 113)

Moving Calls 5-3
5.
M
o
vin
g
Calls
• when your extension rings, but no one answers (for a period of time
specified at the communications server)
• for both when your extension is busy and when it rings but no one
answers.
To forward
internal and
external calls
under all
conditions ➩ Get a dial tone.
➩ Press the Forward key.
➩ Dial the extension or dial 9 and the outside
number, to which you want your calls to be
forwarded. Your primary line key status
light flickers and the Forward status light
turns on to indicate that Variable
Forwarding is active for your extension.
➩ Hang up.
Note: For this method of forwarding to work, Fixed Forwarding
must not be active.
To set up
Variable
Forwarding
options on a
display phone ➩ Press the Program key. The Program status
light turns on. PRESS FEATURE KEY OR
DIAL CODE is displayed.
➩ Press the Forward key. If your extension
has been set up for Variable Forwarding,
the first Variable Forwarding option is
displayed, as shown under the following
step.
Note: On Version 6.1 only, SYSTEM FORWARD is displayed if
Fixed Forwarding has been set up for your extension. It is
followed by either ON or OFF, depending on whether Fixed
Forwarding is currently active. If Fixed Forwarding is on and
you press the Clear key, Fixed Forwarding is deactivated.