Siemens 600Series - Manual (Page 51)

Using Your Phone 2-15
2.
U
sing
Y
o
u
r P
hone
Hold
Putting a Call on Hold
The Hold key lets you hang up a line without disconnecting the other
party. If you do not retrieve the call after a certain period of time
(determined by the communications server), your telephone rings. If it
is an external call and you do not answer, the call is transferred to the
operator.
If you want to make another call after placing a call on hold, you must
use another line. If your telephone has only one line, use the
consultation feature to place another call. (See “Consultation” on page
3-12.)
Note: On Version 6.3 and higher, you can put conference calls and
consultation calls on hold.
To put a call on
hold ➩ Press the Hold key.
➩ If you were using the handset, you can
hang up.
The status light beside the line key flashes
to remind you that the call is on hold, and
the communications server will call you
back after a certain period of time. You can
put only one call on hold per line.
To reconnect to
the call ➩ Press the line key next to the flashing status
light, or pick up the handset and press the
line key.
To pick up a call
on hold at
another
extension ➩ Press the Pickup key, or get a dial tone and
dial * 3.
➩ Dial the number of the extension at which
the call was placed on hold.