Sharp UX-B20 - Manual (Page 12)

Attachments
10
Attachments
Points to keep in mind when setting up
Do not place
the machine in
direct sunlight. Do not place
the machine
near heaters or
air conditioners. Keep dust away
from the machine.
About condensation
If the machine is moved from a cold to a warm place, it is possible that
condensation may form on the scanning glass, preventing proper scanning of
documents for transmission. To remove the condensation, turn on the power and
wait approximately two hours before using the machine.
Removing the packing tape
1
Open the operation panel.
2
Open the print compartment cover.
Keep the area
around the
machine clear.