Sharp UX-B20 - Manual (Page 51)

Sending a Fax From Memory
49
2. Send
ing
Fa
x
e
s
5
Repeat Steps 3 and 4 for each of the other destinations to which you
wish to send the fax (maximum of 20).
•
To check your selected destinations, press to scroll through them. To
delete a destination, scroll to the destination and then press .
6
When you are ready to begin transmission, press .
•
A Transaction Report is automatically printed out after Broadcasting is
completed. Check the "Note" column of the report to see if any of the
destinations are marked "Busy" or have a communication error code. If so,
send the document to those destinations again.
START/
MEMORY
Memory transmission
You can also send a fax through memory when sending to a single
destination. This is convenient when sending to destinations where the line is
often busy, as it saves you from waiting to pick up the original document and
frees the feeder for other operations.
To send a fax through memory, load the document, press , and then
dial using one of the following methods:
♦
Press the number keys to enter the fax number and then press .
♦
Press repeatedly to select an auto-dial number and then press .
♦
Press once to select the last number dialed and then press .
START/
MEMORY
START/
MEMORY
START/
MEMORY
START/
MEMORY