SIIG 04-0265F - Manual (Page 13)

13
5. Select Silicon Image Sil 3512 SATALink
Controller..., then click OK
6. Follow on-screen instructions to complete Windows
Server 2008 installation.
Existing Windows 2008 Installation
1.
Install the board and boot up Windows.
2. At the Found New Hardware Wizard, select Locate
and install driver software (Recommended), then
click Don't search online.
3. Insert the driver CD. The driver will install
automatically.
4. Click Close.
5. Remove the driver CD and restart your Windows to
complete the installation.
Windows Server 2008 (64-bit)
New Windows 2008 Installation
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do you want to install Windows?, click
Load Driver.
3. Insert driver CD, then click Browse.
4. Double click CD Drive (D:). (change D: to match
your CD-ROM drive letter)
5. Double click 64bit folder, highlight AMD64 (for 64-
bit extended processors) or IA64 (for 64-bit Intel
Itanium processors), then click Ok.
6. Select Silicon Image Sil 3512 SATALink
Controller..., then click Next.
7. Follow on-screen instructions to complete Windows
Server 2008 installation.