SysKonnect 9843 User Manual
Page 29
28
Appendix D. Other Functions of the Diagnostics Program
In addition to performing the three network card tests, the diagnostics program can also read out
network card-specific data that may be useful for pinpointing the causes of faults.
Start the Main Program
1. Boot up in DOS and wait for the prompt.
2. Insert the installation CD in the CD-ROM drive of the computer in which the network card is
installed.
3. Type the drive letter of your CD-ROM drive (e.g. D:) and change to the appropriate product
directory.
4. Type
sk98diag
and press Enter. The main menu will appear. It will look similar to this:
5. Select the appropriate menu (see above).
6. To quit the program, select Exit in the main menu. This option is automatically offered for
selection if you did not previously select a menu item.
Fig. 10. Diagnostics program,
main menu