Chapter 1. fundamentals – SysKonnect 9843 User Manual
Page 6
5
Chapter 1. Fundamentals
SK-NET Gigabit Ethernet Server Adapters combine servers and workstation computers with the high-
speed Gigabit Ethernet network (1000 Mbit/s) using fiber-optic (FO) or copper cables. At present
there are eight types available. They differ in terms of the number of ports and the transmission
mode. SC duplex connectors, VF-45 connectors (FO) or RJ-45 connectors (copper cabling) are
used to connect to the data network. The adapters can be connected to a switch, a buffered
repeater, or directly to a second station (see also Fig. 1).
Network card
Port configuration
Fiber-optic transmission
(wavelength)
Copper cabling
SK-NET GE-
Single-Port-
Version
Dual-Port-
Version
1300 nm
850 nm
UTP
LX
9841
n
n
LX dual link
9842
n
n
SX
9843
n
n
SX Volition
9861
n
n
SX dual link
9844
n
n
SX dual link Volition
9862
n
n
T
9821
n
n
T dual link
9822
n
n
Computers in which the adapter is to be installed must have one free slot that complies at least with
PCI specification v2.0. A 32-bit or a 64-bit PCI bus running at 33 or 66 MHz may be used. Optimum
performance is generally obtained with a 64-bit/66 MHz PCI bus.