2 session settings explained, 1 general session settings, Session settings explained – Symbol Technologies AccuScan Palm Pro User Manual
Page 11: General session settings, Chapter 3: sessions
Chapter 3: Sessions
2
.
Select Session Settings.
3.
Select the New button.
AccuScan Sessions [General]
4
.
Enter the name of the session you are creating.
5.
Configure your session’s General, Hot Sync, Data and Backup attributes as described in
AccuScan Sessions [General]
Sections 3.2.1-3.2.4. When you are finished, press Done. If you do not need to modify the
session, the default settings will be used and you can proceed directly to Field Settings,
Chapter 4, if you wish to use default session settings.
3.2
Session Settings Explained
3.2.1
General Session Settings
General Session Settings are used to control the general operating characteristics of the session.
These operating characteristics cannot be set at the field level.
AccuScan Sessions [General]
Start On Screen
Select the screen the User will enter when they leave the AccuScan Palm Splash Screen. The
user can choose between starting on the Main Screen or the Data Entry screen. Note that this
AccuScan PalmM-0002.010
11