Symbol Technologies AccuScan Palm Pro - Manual (Page 8)

Chapter 2: Installation
POS-X encourages all users who benefit from AccuScan Palm to register their copy. To register
AccuScan Palm, we only require your AccuScan Palm PDA ID and an Email address. We
generate a unique registration code for your AccuScan Palm PDA ID so it is important that you
send the ID exactly as it appears on the AccuScan Palm splash screen; capitalization and
spacing are critical.
How to Register:
1. Send your PDA ID number and email address to [email protected] or call 1-800-903-
6572
2. Once your purchase is completed and payment is received, your registration code is e-
mailed to the address provided. This process usually takes approximately one hour but
we ask that you allow one business day in the event of heavy traffic or any other delay.
3. Once you receive your registration code, follow the instructions below to enter the code
into your PDA.
Entering Your Registration Code
1. Start the AccuScan Palm application on the PDA.
2. Click the Register button in the AccuScan Palm Splash Screen.
3. Enter your Registration Code at the Code prompt.
4. If the Registration Code is valid, you will receive a Thank you for Purchasing
AccuScan Palm message.
2.4 Upgrading AccuScan Palm
To upgrade from an existing version of AccuScan Palm or to upgrade to AccuScan Palm Pro,
follow these steps:
2.4.1 Upgrading from AccuScan Palm 2.0 Standard to AccuScan Palm 2.0 Pro
4. If you have already purchased and registered a registration code for AccuScan Palm 2.0
Standard Edition, you will need a new registration code for the Pro Edition.
5. Start the AccuScan Palm 2.0 application on your PDA, and go to the main screen.
6. Click on the menu and choose “About AccuScan Palm”
7. Click the “Upgrade” button in the lower right corner of the screen.
8. Click “OK”, then exit AccuScan Palm, and start AccuScan Palm again.
9. Select the “Pro Mode,” and tap “Register”
10. Now you can enter your new registration code for the Pro version.
AccuScan Palm 2.0 Exists as a Separate Application
Since AccuScan Palm 2.0 is a significant version update, we have created this application as
a separate and independent application from any previous AccuScan Palm versions. We
hope that this process eases the transition process of existing AccuScan Palm users.
AccuScan PalmM-0002.010 8