Sceptre Technologies X42 - Manual (Page 16)

SCEPTRE X42 HDTV User Manual
- 16 -
www.SCEPTRE.com
6. LINE OUT (lower) – This connection port is used for sending out audio signals to other audio
devices such as stereo/surround sound receivers and sending out video signals to other video device
such as TV monitor or VCR. The black square (OPTICAL SPDIF OUT) connector sends out either
bit-stream or PCM digital sound signal to a home theater receiver with digital input. The yellow (AV
OUT) connector sends out the video signal. The red (R) and white (L) connectors send out the audio
signal. This connection port uses RCA audio cable for sound, composite cable for video, and an
optical audio cable for digital audio out. Please note : You can only use the red/white connection or
the single black square connection. Do NOT connect both.
The following descriptions are for connections from left to right.
7. COMPONENT 1 (upper) – These connection ports are for DVD players, or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue, and red for video, and then
connect white for left channel audio, red for right channel audio. Use the SOURCE button to select
YPbPr1 to view this connection.
8. COMPONENT 2 (lower) – These connection ports are for DVD players, or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue, and red for video, and then
connect white for left channel audio, red for right channel audio. Use the SOURCE button to select
YPbPr2 to view this connection.
9. VGA – This connection port connects to a PC for video using VGA cable. Be sure to connect your
audio cable to the VGA Stereo input if you want sound out of VGA video source. Use the SOURCE
button to select VGA on your MAIN SOURCE to view this connection.
10. VGA STEREO INPUT – This connection port is for people who want to provide audio to the TV
when using a PC or a DVI video device. Use a 3.5mm mini-jack audio cable (headphone jack) to
provide audio for a HDCP enabled DVI video device or PCs with VGA or DVI connection.
11. AC IN - This connection is for providing power to the TV. This connection uses a standard
computer power cord.
Please Note:
• This TV features a power saving function which will turn off the TV automatically after 15
minutes of idling on a connection with no signal. This feature is present on all connection.