Sceptre Technologies X42 - Manual (Page 35)

SCEPTRE X42 HDTV User Manual
- 35 -
www.SCEPTRE.com
If You Want the Fair Connection with Composite…
1. Make sure the power of X42 LCD HDTV and your set-top box is
turned off.
2. Obtain a Yellow Video Cable. Connect the Yellow Video connector to
both your set-top box and Composite 1’s Yellow Video connector
port off the back of your X42 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to
both your set-top box and Composite 1’s white connector port off the
back of your X42 LCD HDTV.
4. Connect the red color connector to both your set-top box and
Composite 1’s red connector port off the back of your X42 LCD
HDTV.
5. Turn on the X42 LCD HDTV and your set-top box.
6. Use the remote control’s source button or the source button on the
right side of the TV to switch to AV 1 (CVBS).
Please Note :
• If Composite 1 is already occupied, please use Composite 2 as
your connection port and switch source to AV 2 (CVBS).
• Please reference the set-top box’s manual as well, to make sure
the set-top box is configured to output correctly to the TV.
• Sceptre’s X42 LCD HDTV supports SONY’s universal remote
code. Please look up SONY’s codes in your universal
remote’s hand book.