Sony Ericsson CDP-CX220 - Manual (Page 15)

– 15 –
cam
cam holder (disc A2)
thrust
screw
disc
0 – 1 mm
holder (disc A2)
disc
holder (disc A2)
thrust
screw
HOLDER (DISC A2) ALIGNMENT
(1) Rotate the cam and adjust to the position
shown in the figure.
(3) After applying suitable locking compound to the part, rotate the thrust screw until the holder (Disc A2) comes to the center of
the disc.
(2) Check that the state is as shown in
the figure.
123
123