Snapper 1685336 - Manual (Page 3)

Figure 7A. 4 2 ” Blade Group 1
Figure 76. 42” Blade Group 2
Member From Top Down
Figure 7D. 42” Blade Group 4
Figure 7E. 46” Blade Group 3
Figure 7C. 42” Blade Group 3 Figure 7F. 46” glade Group 4
Figures 7A 7F. Spring Installation
8 . Lower push bar and install dozer blade with kingpin
(A, spring clip, and pivot pin(B). Reattach
rod guide (D) and secure with cotter pin (C).
9. Tighten (A, 4 or 5) and nut which
hold chain to tractor frame.
Perform Lift Rod Adjustment as instructed in
Operator’s Manual for your Snow Plow/Dozer
Blade.