Sennheiser SR 2050 IEM - Manual (Page 11)

Putting the transmitter into operation
10
̈
Guide the BNC connector of the BNC extension cable through the hole in the rack mount
“ear”
³
.
̈
Connect the BNC connector to the antenna output
ƽ
.
̈
Screw the antenna holder to the BNC socket
ƿ
using the supplied washer and
nut .
̈
Secure the antenna holder to the rack mount “ear”
³
of the transmitter using two of
the supplied screws.
If you are using the SR 2050 IEM twin transmitter:
̈
Mount the second BNC extension cable in the same way.
̈
Slide the transmitter into the 19” rack.
̈
Connect the rod antennas
ƾ
to the two BNC sockets
ƿ
.
ƿ
³
ƿ
ᕡ
³
³
1
ƿ
ƿ
ƾ
ƿ