Network operation using the wsm, Operation without network – Sennheiser SR 2050 IEM User Manual

Page 23

Advertising
background image

Synchronizing the transmitter with an EK 2000 IEM receiver

22

Synchronizing the transmitter with an EK 2000 IEM
receiver

When synchronizing your transmitter with an EK 2000 IEM receiver, please observe the
following:

Synchronizing the transmitter with an EK 2000 IEM receiver – individual operation

Upon delivery, transmitter and receiver are synchronized with each other. If, however, you
cannot establish a transmission link between transmitter and receiver, you have to synchro-
nize the channels of the devices:

̈

Carry out the

Easy Setup Sync

function and then the

Sync

function (see page 16).

Alternatively, you can set the channel on the transmitter manually:

̈

Make sure that you set the transmitter to the same frequency bank and the same channel
as the receiver.

Synchronizing transmitters with EK 2000 IEM receivers – multi-channel operation

Network operation

using the WSM

In multi-channel operation, the transmitters are remote controlled via a PC running the

Wireless Systems Manager

” (WSM) software.

̈

Connect your transmitters and your PC in a network (see page 12).

̈

Switch your transmitters and your PC on.

̈

Launch the “

Wireless Systems Manager

” (WSM) software.

̈

To set up your multi-channel system, proceed as described in the instruction manual of
the “

Wireless Systems Manager

” (WSM) software.

Operation without

network

̈

Carry out the

Easy Setup Sync

function and then, for each transmission link, the

Sync

function (see page 16).

̈

Only use a transmitter and a receiver from the same frequency range (see the
type plate on the transmitter and the receiver).

̈

Make sure that the desired frequencies are listed in the enclosed frequency infor-
mation sheet.

̈

Make sure that the desired frequencies are approved and legal in your country
and, if necessary, apply for an operating license.

Advantages of controlling the transmitters via the “

Wireless Systems Manager

(WSM) software:

• Detailed overview of all transmission and receiving channels

• Remote control of all transmitters in the network

• Combination of transmitters of different frequency ranges (see page 4).

Stereo Transmitter SR 2050 IEM

Stereo Transmitter SR 2050 IEM

Stereo Transmitter SR 2050 IEM

Advertising
This manual is related to the following products: