Scientific Atlanta AllTouch AT8450 Rev A - Manual (Page 14)

14
Change VCR/VOD Programming
Your remote was originally programmed in one of the following ways:
• The Rewind, Play, Fast Forward, Stop, Pause, and Record keys are known as transport
keys. These keys are programmed, by default, to transmit the codes for the Explorer
®
8000 ™ series Home Entertainment Server video-on-demand (VOD) or digital video
recorder (DVR) functions when in CBL mode.
• The transport keys control different devices, depending on the mode key you press.
You can choose to override the default settings for the transport keys so that the transport
keys operate a different device when you have selected Cable (CBL) mode.
Try your remote to see how the transport keys currently work. If you want to change the
settings for the transport keys, complete the procedure that fits your needs.
Changing VCR/VOD Programming
(Program Code 9 9 9)
1. Press and hold CBL and SELECT until all mode keys blink twice.
2. Press 9 9 9. The CBL key blinks twice.
3. Press the DVD mode key associated with the device you want the transport
keys to now control. All mode keys blink three times.
Results:
• The transport keys now always control the device associated with the mode you
selected in this step (DVD).
• Pressing Play starts the VCR, the DVD, or the device that has been reassigned to AUX.
• In AUX mode, the remote always controls channels for the device assigned to the AUX
key.
Restoring Default VCR/VOD Settings
(Program Code 9 9 9)
1. Press and hold CBL and SELECT until all mode keys blink twice.
2. Press 9 9 9. The CBL key blinks twice.
3. Press CBL. All mode keys blink three times.
Result: The transport keys are restored to their default settings.
Example: Pressing Play in CBL mode starts the DVR.