Scientific Atlanta AllTouch AT8450 Rev A - Manual (Page 6)

6
T11282
What Devices Can I Control?
The mode keys arched across the top of the remote tell the remote which device you
want to operate.
Each mode key is associated with different groups
of devices. You can use each mode key to control
one of its associated devices:
Mode Key Associated Devices
CBL .......... cable boxes, HDTV tuners, and satellite receivers
TV ............. TVs and HDTVs
DVD .......... DVD players, VCRs, digital video recorders (DVRs), and CD players
AUX .......... receivers, tuners, and Home Theater in a Box (HTIB)
What Devices Do I Want to Control?
Record the devices (including brand) you want to control here:
1_____________________________ 3_____________________________
2_____________________________ 4_____________________________
Does each mode key relate to only one of your devices? If yes, go to Program the
Remote to Control My Devices. Otherwise, reassign the mode keys to match your
combination of devices.
Reassign Mode Keys
If you are a big movie fan, you may want to control two video recording devices. Perhaps
you have a DVD player and a VCR, or a VCR/DVD combination device. How can you
control both the VCR and the DVD player when you only have one DVD key? With the
AT8450, you can reassign a mode key to operate in a different mode. For example, you
can reassign the AUX key to operate the VCR in DVD mode. Then, you can program the
DVD key to control your DVD player. You can reassign the AUX key, the DVD key, or
both. The TV key and the CBL key cannot be reassigned.
Reassigning Mode Keys
(Program Code 9 9 2)
1. Press and hold SELECT and CBL until all mode keys blink twice.
2. Press 9 9 2. The CBL mode key blinks twice.
3. Press the mode key associated with the type of device you want to control, and then
press the mode key that you want to change. All mode keys blink three times.
Some Common Examples
• To program the AUX key to operate in DVD mode, press DVD and then AUX.
• To program the DVD key to operate in TV mode, press TV and then DVD.
4. When finished, go to Program the Remote to Control My Devices.