Solid State Logic 4.3 - Manual (Page 33)

Soundscape Mixpander
Page 33 of 59
4. Driver Settings
Using the WDM/KS drivers
The WDM/KS drivers are loaded during log on. These drivers can be set up in the Windows
Control Panel, Sounds and Audio Devices, Audio tab. The individual inputs and outputs are
always listed as pairs. However multichannel audio can be used (under Windows XP only).
“Mixpander x WDM (where x is the unit number) must be selected as the default audio device for
sound playback. The speaker configuration must be selected in the “Advanced Audio Properties”
window, which can be opened by clicking the “Advanced” button in the “Sounds and Audio
Devices Properties” window: