Sony RM-LJ312 - Manual (Page 20)

20 GB
1
Press I repeatedly.
The RECEIVER menu appears.
2
Move the easy scroll key to select the
item you want to set, then press the key
to enter the selection.
Each time you press the key, the setting
changes. For details on each items, refer to
the operating instructions supplied with the
receiver.
You can set the following items;
• TEST TONE: Turns on or off the test
tone.
• DIRECT: Outputs the audio signals
without adjustments.
• SB DECODING: Selects the SB
DECODING setting.
• NIGHT MODE: Turns on or off the
NIGHT MODE function.
• DIMMER: Adjusts the brightness of the
display.
• INPUT MODE: Selects the INPUT
MODE setting.
• EQ: Turns on or off the equalizer.
• SLEEP: Selects the sleep timer setting.
• TRIGGER ON*: Turns on the 12V
TRIGGER function.
• TRIGGER OFF*: Turns off the 12V
TRIGGER function.
*Models of area code U, CA only.
By using the Learning function, it is possible for
this commander to perform learned operations.
Setting remote control codes
that are not stored in the
commander
When a remote control code is not one of the
presets stored in the commander, it is possible
for the commander to learn the code using the
Learning function.
1
Press RM SET UP.
The set up list appears.
2
Move the easy scroll key to select
“LEARNING”, then press the key to
enter the selection.
The input list appears.
Using the RECEIVER menu
<RECEIVER>
cTEST TONE
DIRECT
SB DECODING
Learning the commands of
your components
cIR SET
LEARNING
DOWNLOAD
INPUT LIST
<LEARNING>
[VIDEO 1]
c[VIDEO 2]
[VIDEO 3]
+
–
+
–
+
–
O
TOP MENU/GUIDE AV MENU
DISPLAY
TV VOL TV CH TV/VIDEO
WIDE
MAIN
MENU
ON SCREEN
RETURN/EXIT
MASTER
VOL
MUTING
H X x
. > m M
Buttons for learning