Sony UP-DF500 - Manual (Page 33)

Prep
ar
at
ion
IP Address
33
IP Address
When you use the unit for the first time immediately
after you purchase the unit, it is necessary to set up the
DICOM part placed inside the unit, adding an IP address
and so on.
Before starting the setup, confirm the following with the
network administrator.
• The IP address the UP-DF500 will use on the network
• Sub-net mask of the network
• Gateway address, if a gateway is included in the
network
To confirm the IP address
The IP address assigned to the UP-DF500 can be
confirmed.
1
Turn the UP-DF500 on.
2
Press the MENU button.
3
Display INFORMATION on the LCD by pressing
the
F or f button, and then push the g button.
4
Display IP ADDRESS on the LCD by pressing the
F or f button.
The IP address assigned to the UP-DF500 appears
on the LCD.