Samsung P63FP-2 - Manual (Page 108)

Information
For Better Display
Adjust the computer resolution and screen injection rate (refresh rate) on the
computer as described below to enjoy the best picture quality. You can have an
uneven picture quality on screen if the best picture quality is not provided for PDP.
• Resolution: 1360 x 768(P50HP, P50HP-2)
Resolution: 1920 x 1080(P63FP, P63FP-2)
• Vertical frequency (refresh rate): 60 Hz
PDP panels manufactured by using advanced semiconductor technology with
a precision of 1ppm (one millionth) and above is used for this product. But the pixels
of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some
of black pixels could be seen. This is not from bad quality and you can use it without
any problems.
• For example, the number of PDP sub pixels contained in this product are
3,113,440.(P50HP, P50HP-2)
• For example, the number of PDP sub pixels contained in this product are
6,220,800.(P63FP, P63FP-2)
When cleaning the monitor and the panel outside, please apply the recom-
mended small amount of cleaner by using a soft cloth to polish. Do not force the
PDP area but rub softly. If excessive force is applied, you may stain it.
If you are not satisfied with the picture quality, you can get better quality of
picture by performing the "Auto Adjustment function" in display screen that is ap-
peared as window termination button is pressed. If there's still noise after the
automatic adjustment, use the Fine/Coarse adjustment function.
When viewing a fixed screen for an extended period of time, a residual image
or blurriness may appear. Change the mode to energy save or set a screensaver
to move the picture when you need to be away from the monitor for an extended
period of time.
PRODUCT INFORMATION (Image Retention Free)
What is Image Retention ?
Image retention may not occur when a PDP panel is operated under normal con-
ditions.
Normal conditions are defined as continuously changing video patterns. When the
PDP panel is operated for a long time with a fixed pattern .
Phosphor degradation may occur and the brightness is decreased. To prevent this,
the video pattern should be changed from time to time.
When viewing a still screen for a long time, the brightness of any part which was
bright in the previous fixed pattern becomes lower than that of its surroundings.
82