Samsung P63FP-2 - Manual (Page 66)

Name the input device connected to the input jacks to make your input source selection
easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game /
Camcorder / DVD Combo / DHR / PC
Note
• When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC.
• In other cases, set Edit Name to AV.
• However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals
for AV and PC, make sure to set the Edit Name in accordance with the input signal.
• The Picture menu changes depending on the input signal and Edit Name.
Picture [PC / DVI / BNC / MagicInfo Mode]
Available Modes
• PC / DVI / BNC
• AV
• HDMI
• MagicInfo
• Component
Note
• MagicInfo can only be enabled when a network box is connected.
• The HDMI port and network box cannot be connected at the same time.
MagicBright
MENU → → ENTER → → ENTER → → , → ENTER
Adjusting the PDP Display
40