Samsung P63FP-2 - Manual (Page 115)

Vertical Frequency The screen must be redrawn several times per second in
order to create and display an image for the user. The fre-
quency of this repetition per second is called the Vertical
Frequency or Refresh Rate. Unit: Hz
Example: If the same light repeats itself 60 times per sec-
ond, this is regarded as 60 Hz.
Horizontal Frequency The time to scan one line connecting the right edge to the
left edge of the screen horizontally is called the Horizontal
Cycle. The inverse number of the Horizontal Cycle is called
Horizontal Frequency. Unit: kHz
Interlace and Non-Interlace
Methods
Showing the horizontal lines of the screen from the top to
the bottom sequentially is called the Non-Interlace method
while showing odd lines and then even lines in turn is called
the Interlace method. The Non-Interlace method is used for
the majority of monitors to ensure a clear image. The Inter-
lace method is the same as that used in TVs.
Plug & Play This is a function that provides the best quality screen for
the user by allowing the computer and the monitor to ex-
change information automatically. This monitor follows the
international standard VESA DDC for the Plug & Play func-
tion.
Resolution The number of horizontal and vertical dots used to compose
the screen image is called the 'resolution'. This number
shows the accuracy of the display. A high resolution is good
for performing multiple tasks as more image information can
be shown on the screen.
Example: If the resolution is 1360(1920) x 768(1080), this
means the screen is composed of 1360(1920) horizontal
dots (horizontal resolution) and 768(1080) vertical lines
(vertical resolution).
SRS TS XT This feature outputs sonorous and vivid 3D sound as for 5.1
channel speaker sound but through a 2-channel speaker. It
has a good effect when stereo signals are input.
Multiple Display Control
(MDC)
A Multiple Display Control (MDC) is an application allowing
various displays to be easily and simultaneously operated
on a PC. RS-232C, a standard of serial communication, is
used for communicating between a PC and a display.
Correct Disposal
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Eu-
rope only
(Applicable in the European Union and other European countries with
separate collection systems)
This marking on the product, accessories or literature indicates that the
product and its electronic accessories (e.g. charger, headset, USB cable)
should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate these items
Appendix
89