Samsung P63FP-2 - Manual (Page 93)

• Component
Note
• MagicInfo can only be enabled when a network box is connected.
• The HDMI port and network box cannot be connected at the same time.
Multi Control
Assigns an individual ID to the SET.
MENU → → → → → ENTER → → ENTER → , → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
MagicInfo
Available Modes
• PC / DVI / BNC
• AV
• HDMI
• MagicInfo
• Component
Note
• MagicInfo can only be enabled when a network box is connected.
• The HDMI port and network box cannot be connected at the same time.
Note
• The remote control can be used to select MagicInfo. However, it is recommended to use
a separate USB keyboard to utilize MagicInfo fully.
Adjusting the PDP Display
67