Sony Ericsson PVM-20M4A - Manual (Page 14)

14
@¡
NTSC SETUP LEVEL menu
Select the NTSC setup level from two modes.
The 7.5 setup level is mainly used in north America.
The 0 setup level is mainly used in Europe.
For PVM-14M4U/14M2U/20M4U/20M2U
[7.5]
For PVM-14M4E/14M4A/14M2E/14M2A/20M4E/
20M4A/20M2E
[0]
@™
ACC menu
Set ACC (Auto Color Control) circuit on or off. When
the fine adjustment is necessary, select OFF on the
ACC menu.
Normally select ON.
[ON]
@£ LANGUAGE menu
You can select the menu language from among five
languages (English, German, French, Italian, Spanish).
[ENGLISH]
@¢
DEGAUSS DELAY menu
Set the delay time of auto degaussing to start working
after the power is turned on. The delay time can be set
within 0 to 99 seconds.
[0]
@∞ LANDING screen
This menu is provided only for PVM-20M4U/20M4E/
20M4A.
If the color is not uniform even after you press the
DEGAUSS button, you can adjust the landing so as to
obtain color uniformity on this screen.
The following two methods are available to adjust the
landing.
When the signals of the horizontal lines are input
and displayed:
Press the
./– or >/+ button until the lines are
displayed on the screen as horizontally as possible.
When the signals of the white color are input and
displayed:
Press the
./– or >/+ button until the white color on
the screen become as uniform as possible.
To reset the setting to standard (00), press the
RESET button.
Using On-Screen Menus