Sony Ericsson PVM-20M4A - Manual (Page 18)

18
For PVM-14M2E/14M2A:
CRT P-22 phosphor
Power consumption 90 W (with SDI: 99 W)
Power requirements 100 to 240 V AC, 50/60Hz, 1.2–0.5 A
Peak inrush current
(1) Power ON, current probe method: 18 A (240 V)
(2) Hot switching inrush current, measured in
accordance with European standard EN55103-1:
4 A (230 V)
Dimensions (w/h/d) Approx. 346
Ч
340
Ч
431 mm
(13 5 ⁄ 8
Ч
13 1 ⁄ 2
Ч
17 inches)
not incl. projecting parts and controls
Mass Approx. 16.7kg (36 lb 13 oz)
Accessory supplied AC power cord (1)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
For PVM-20M4U:
CRT SMPTE-C phosphor
Power consumption 125 W (with SDI: 135 W)
Power requirements 120 V AC, 50/60Hz, 1.3 A
Dimensions (w/h/d) Approx. 450
Ч
458
Ч
503 mm
(17 3 ⁄ 4
Ч
18 1 ⁄ 8
Ч
19 7 ⁄ 8 inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Accessory supplied AC power cord (1)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
For PVM-20M4E/20M4A:
CRT EBU phosphor
Power consumption 130 W (with SDI: 140 W)
Power requirements 100 to 240 V AC, 50/60Hz, 1.6–0.6 A
Peak inrush current
(1) Power ON, current probe method: 18 A (240 V)
(2) Hot switching inrush current, measured in
accordance with European standard EN55103-1:
7 A (230 V)
Dimensions (w/h/d) Approx. 450
Ч
458
Ч
503 mm
(17 3 ⁄
4
Ч
18 1 ⁄
8
Ч
19 7 ⁄
8
inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Accessory supplied AC power cord (1)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
Specifications
For PVM-20M2U:
CRT P-22 phosphor
Power consumption 115 W (with SDI: 125 W)
Power requirements 120 V AC, 50/60Hz, 1.2 A
Dimensions (w/h/d) Approx. 450
Ч
458
Ч
503 mm
(17 3 ⁄ 4
Ч
18 1 ⁄ 8
Ч
19 7 ⁄ 8 inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Accessory supplied AC power cord (1)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
For PVM-20M2E:
CRT P-22 phosphor
Power consumption 120 W (with SDI: 130 W)
Power requirements 100 to 240 V AC, 50/60Hz, 1.5–0.6 A
Peak inrush current
(1) Power ON, current probe method: 18 A (240 V)
(2) Hot switching inrush current, measured in
accordance with European standard EN55103-1:
7 A (230 V)
Dimensions (w/h/d) Approx. 450
Ч
458
Ч
503 mm
(17 3 ⁄ 4
Ч
18 1 ⁄ 8
Ч
19 7 ⁄ 8 inches)
not incl. projecting parts and controls
Mass Approx. 30.0 kg (66 lb 2 oz)
Accessory supplied AC power cord (1)
AC plug holder (1)
Tally label (1)
Cable with a 20-pin connector (1)
Common to all models
Operating temperature
0 to +35°C (32 to 95°F)
Transport and Storage temperature
–10 to +40°C (14 to104°F)
Pressure 700 to 1,060 hPa
Humidity 0 to 90% (no condensation)
Design and specifications are subject to change
without notice.