SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 285)

S
PANNING
T
REE
C
OMMANDS
3-117
Example
spanning-tree hello-time
Use this command to configure the Spanning Tree bridge hello
time globally for this switch. Use the no form to restore the
default.
Syntax
spanning-tree hello-time time
no spanning-tree hello-time
time - Time in seconds. (Range: 1-10 seconds)
The maximum value is the lower of 10 or [(max-age / 2) -1].
Default Setting
2 seconds
Command Mode
Global Configuration
Command Usage
This command sets the time interval (in seconds) at which the
root device transmits a configuration message.
Example
Console(config)#spanning-tree forward-time 20
Console(config)#
Console(config)#spanning-tree hello-time 5
Console(config)#
b_mgmt.book Page 117 Tuesday, July 8, 2003 5:24 PM