SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 344)

C
OMMAND
L
INE
I
NTERFACE
3-176
Default Setting
Shows all sessions.
Command Mode
Privileged Exec
Command Usage
This command displays the currently configured source port,
destination port, and mirror mode (i.e., RX, TX, RX/TX).
Example
The following shows mirroring configured from port 6 to port 11:
Related Commands
port monitor (3-174)
Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6
Console(config-if)#end
Console#show port monitor
Port Mirroring
-------------------------------------
Destination port(listen port):Eth1/1
Source port(monitored port) :Eth1/6
Mode :RX/TX
Console#
b_mgmt.book Page 176 Tuesday, July 8, 2003 5:24 PM