Samsung SF-530 Series - Manual (Page 92)

3.35
Stand-alone Fax
Additional Functions
Sending a Recall (R or Flash)
Some special phone services require a switch-hook signal for proper
operation. For example, if you have call-waiting, you can put a call on
hold and take a second call on the same line by pressing Recall(R or
Flash)/Status.
1. When you are on the telephone and hear the call waiting signal,
press Recall(R or Flash)/Status once. The first caller is on hold
and you are speaking to the second caller.
2. Press Recall(R or Flash)/Status again to talk to the first caller again.
Note: If you do not have a special service that uses the switch-hook signal,
do not press Recall(R or Flash)/Status during a call. If you do, you
could disconnect the line.
Monitoring a Dual Job Status
Your machine can perform more than one of many functions
simultaneously. For example, you can;
• Receive a fax into the memory while making a copy.
• Store a fax document for later transmission while printing an incoming
fax.
When the machine performs dual tasks, press Recall(R or Flash)/Status
to see the current status on the display of the other operation. Each time
you press Recall(R or Flash)/Status, the current status of the two
operations displays alternatively.