Sioux Tools TURBO-MAX 6056 - Manual (Page 2)

Page 2
GENERAL INFORMATION
1. Unless otherwise specified, high-strength (grade5)
(3 radial-line head markings) hex head bolts are used
throughout assembly of this piece of equipment.
2. Whenever terms “LEFT” and “RIGHT” are used in this
manual it means from a position behind wagon box and
facing forward.
3. When placing a parts order, refer to this manual for
proper part numbers and place order by PART NO. and
DESCRIPTION.
4. Read assembly instructions carefully. Study
assembly procedures and all illustrations before you begin
assembly. Note which parts are used in each step. This
unit must be assembled in proper sequence or complica-
tions will result.
WARNING:
TO AvOID PERSONAL INjuRy OR DEATH, ObSERvE FOLLOWING
INSTRuCTIONS:
Never overload mixer. Rating of gear or rating of tires, whichever is less.
Ensure that anybody present is clear before applying power to any machinery used in conjunc-
tion with wagon box or when moving box.
Never allow anyone in, near, or on mixing chamber during mixing, transporting, or unloading
of feed.
Thank you for purchasing a Turbo-Max Mixer Truck. We feel you have made a wise choice and hope you are completely satis-
fied with your new piece of equipment. Your new Turbo-Max Mixer Truck is a durable, efficient and easy to use unit. Proper
care and use will result in many years of service.
INTRODuCTION
Table of Contents
General Information ......................................................................................................................................................................... 2
Safety , Signal Words ....................................................................................................................................................................... 3
Equipment Safety Guidelines ........................................................................................................................................................... 4
Lighting and Marking ........................................................................................................................................................................ 4
Safety Sign Care .............................................................................................................................................................................. 4
Tire Safety ........................................................................................................................................................................................ 5
Before Operation .............................................................................................................................................................................. 5
During Operation .............................................................................................................................................................................5-7
Following Operation ......................................................................................................................................................................... 7
Highway and Transport Operations .................................................................................................................................................7-8
Performing Maintenance .................................................................................................................................................................. 8
Bolt Torque ....................................................................................................................................................................................... 9
Mixer Setup ..................................................................................................................................................................................... 10
Mixer Operation .............................................................................................................................................................................11-12
Inspections and Adjustments .......................................................................................................................................................... 13
Lubrication Schedule ....................................................................................................................................................................... 14
Decal Location ................................................................................................................................................................................ 15
Oilbath Assembly ............................................................................................................................................................................ 16
Reel & Auger Assembly ................................................................................................................................................................... 17
Final Assembly ..............................................................................................................................................................................18-19
Options ............................................................................................................................................................................................ 20
Discharge Breakdown
Slide Tray ................................................................................................................................................................................... 21
Slide Tray (used on serial #) ...................................................................................................................................................... 21
Hydraulic Breakdown
Electric Selector Valve for Slide Tray .......................................................................................................................................... 22
Switchbox Assembly
Toggle Switch Assembly .............................................................................................................................................................. 23
Joystick Assembly ....................................................................................................................................................................... 23
Driveline Assembly ........................................................................................................................................................................24-25
General Specifications .................................................................................................................................................................... 26
Warranty .......................................................................................................................................................................................... 27