Sunwave Tech. 3815 - Manual (Page 14)

SRC-38 SERIES User’s Manual
8
Touch Screen Buttons
The Touch Screen buttons enable you to operate the
SRC-3810/3815 and your external devices. Use these
buttons to program codes from your existing remotes,
control your devices, and set up command
sequences called macros. You will hear a beep when
you press a button. To activate or deactivate the
beep, see Setting the Beep Signal on page 39. The
SRC-3810/3815 turns itself off after a user specified
time. To change the time, see Setting the Power Down
Time on page 38.
Using Hard Keys
The buttons on the bottom part of the SRC-3810/3815
enable you to operate devices as well as program the
SRC-3810/3815.
Three buttons have special functions:
• Page/Date Button: Toggles from Page 1 to
Page 2 of the device buttons menus. If held
down for more than two seconds, the date
and time are displayed.
• Power Button: Turns devices off and on. During
Touch Screen Layout (see page 26) displays all
possible LCD options.
• Backlight: Press this button quickly to turn on
the backlight.
Entering the Setup Menus
Press and hold the and the buttons
simultaneously to access the setup menus.