Silvercrest PLAYER DVT-480 - Manual (Page 19)

Client: Lidl
Project: DVT-480
Language: EN
Date: 14.02.2008
Version: 04
Page: 19 (of 57 pages)
Barcode: 400 5037 10 00 1 00259
Done: MS, KV
19
10 Installation
10.1 Set up the player
Place your DVD player on a
sturdy, even surface.
Fold out the support on the rear
of the unit and adjust for best
viewing angle.
Slide the locking mechanism to
the UNLOCK position and adjust
the support to the desired length.
Slide the locking mechanism to
the LOCK position.
•
•
•
•
Note:
For vehicle operation read the chapter Mounting on page 24.
10.2 Connect to power supply
For power supply use the power adapter or car adapter
(→ Power Supply, page 18).
10.3 Insert battery (remote control)
Open the battery compartment
(48) at the bottom of the remote
control. Press and hold the locking
mechanism on the side and pull out
the battery holder at the same time.
Insert the supplied battery, making
sure to match the +symbol on the
battery with the same symbol in the
battery compartment.
Push the battery support holder
back into the battery compartment
(48).
•
•
•
RELEASE RELEASE
+
+ RELEASE
•