Silvercrest PLAYER DVT-480 - Manual (Page 24)

Client: Lidl
Project: DVT-480
Language: EN
Date: 14.02.2008
Version: 04
Page: 24 (of 57 pages)
Barcode: 400 5037 10 00 1 00259
Done: MS, KV
24
12 Mounting
Mount the DVD player with the
head rest holder to the head rest
in your vehicle
Fasten the mounting plate with the
four Phillips screws and washers
on the rear of the DVD player.
The arrow on the mounting plate
should point upward.
•
•
Place the mounting plate with the
foam material side against the
head rest and place the straps
over and under the head rest.
Tighten the straps firmly and close
the Velcro fasteners.
•
•
Insert the DVD player from above
into the mounting plate. Push the
unit downward until it locks into
place.
Connect the supplied car adapter
to DC IN (20) on the DVD player.
Connect the car adapter to a well
accessible 12V cigarette lighter
jack or 12V vehicle power supply
output jack. The car adapter LED
lights up red during operation.
•
•
•
Note:
Observe the safety instructions for in-car operation on page 10. •