Scientific Atlanta VCR Commander - Manual (Page 14)

14
Scheduling VCR Recording
One-Touch Recording
You can instantly record the current program using your remote
control.
SETTINGS
SELECT
SELECT
Be sure there is a tape in your VCR,
and then turn your VCR off.
Recording Alert
START Recording Cancel Recording
Be sure there is a tape in your VCR,
set your VCR Input to S-Video or S-VHS,
and then turn your VCR off.
Recording Alert
START Recording Cancel Recording
Choose SAP Language English
Start Recording HGTV2 Now
Set Sleep Timer (minutes) OFF
Quick Settings
Highlight an option, then press SELECT.
More Settings Return to TV
EXIT
1. Turn on the power to your
Explorer DHCT.
2. Press once while
viewing a full-screen TV
program.
3. Press s or t to scroll to the Start
Recording...Now option.
4. Press to setup the
recording process.
Note:
If the VCR Input option
was set correctly in the General
Settings VCR Commander
Service Setup
, you will see
instructions for selecting the
Input option of your VCR.
5. Put a blank tape in your VCR.
6. Turn off the power to your VCR.
7. Press to start recording
the program. The DHCT
displays rEc, which indicates
that the recording process is
preventing you from using most
of the keys on the remote
control. This ensures that your
recording will not be
interrupted accidentally.
Continued on next page