Samsung SCH-i760 User Manual

Page 98

Advertising
background image

95

Services tab

The Service tab allow you to configure

your phone to receive an incoming data
call, change your roaming mode, and set
your GPS and Voice Privacy preferences.

To access the service settings:

1.

From the Today Screen, tap Start (

)

located in the upper left corner of the
screen.

2.

Tap Settings (

) and from the

Personal tab, tap Phone (

).

3.

Tap the Service tab.

4.

Change or set the following options:

• Auto Answer - Allows you to set the length of time that must pass before the

attached headset or carkit accessory automatically answers the phone (Off, 3
seconds
, 5 seconds, or 10 seconds).

• TTY - Allows you configure the phone to utilize TTY equipment connected to the

phone’s headset jack. Configuration options are: TTY Full, TTY+ Talk (VCO),
TTY + Hear (HCO), or TTY Off. TTY (also known as a TDD or Text Telephone) is
a telecommunications device that allows people who are deaf, hard of hearing,
or who have speech or language disabilities to communicate by telephone.

Note: If TTY mode is enabled, the audio quality of non-TTY devices connected to the headset jack may

become impaired.

• Alert - Allows you to toggle the on/off state for the Minute beep, Connect

tone, and Disconnect tone features.

• Networks - Allows you to select a desired roaming option. For more

information, refer to "Changing your Roaming Network Options" on page 48.

• Data Mode - Allows you to set your phone’s data reception parameters (Data

off, Data for next call, or Data until powered off).

• GPS - Allows you to specify if your phone sends global positioning information

whenever you make a call, i.e. Location On, or only when you make an
emergency 911 call.

• Voice Privacy - Allows you to select the level of encryption used when making

or receiving phone calls. Enhanced mode offers more security but can be
associated with network delay while the advanced encryption is encoded or
decoded.

5.

Tap

to save your changes and return to the previous screen.

ok

Advertising