Sharp AR-507 - Manual (Page 77)

3-43
CHAPTER
3
9 Press the upper “OK” key.
10 Make all other desired copier selections and enter the
desired number of copies.
11 Press the START ( ) key.
● If the document feeder is used, copying will start after all originals
are scanned.
● If the document glass is used, proceed to the next step.
12 Replace the finished original with the next original after
the START (
) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
● Copying will start at this time.
● Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
● To cancel the PAGE NUMBER function, select the PAGE
NUMBER function again and press the “CANCEL” key.
1 2 3
4 5 6
7 8 9
0 P
PROGRAM AUDIT CLEAR
INT
CA
CLEAR ALL
START
SPECIAL FUNCTIONS
Text stamp
TEXT STAMP
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO A4
EXT STAMP
DATE
SELECT
STAMP
PRINT
DIRECTION
PAGE
NUMBER
WATERMARK
OK
OK