Sharp AR-507 - Manual (Page 99)

5-11
CHAPTER
5
MISFEED REMOVAL
COPIER TROUBLE?
Misfeed removal
2 If the misfed paper cannot be removed in the previous step, turn
roller rotating knob D in the direction of the arrow and remove
the paper.
3 Close the exit area cover and the left side cover.
Misfeed in the duplex module
Also see Misfeed around the Fusing Unit and Exit Area (p.5-8)
and Misfeed in the Reversing Area (p.5-10).
If the misfed paper is in the duplex module
or the section below the exit area:
1 Open the exit area cover carefully.
2 Remove the misfed paper.
1 Open the paper guide, turn roller rotating knob E in the
direction of the arrow and remove the misfed paper.
Close the paper guide.
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Roller rotating knob
Paper
guide
E
Roller rotating knob D