Monitoring, Remote control device, Live mode – Samsung SHR-5040 User Manual
Page 33
05
M
en
U
s
et
U
P
menu setup _
29
The selected channel appears within the PIP zone on the
right.
The adjustment can be made from ‘0’ to ‘255’ using the
or button.
If you press “
Apply All”, the values for the last updated
channel are copied to entire channels.
If you press “
default”, the values for the current channel
are reset with ‘128’.
Remote Control Device
This window allows you to control the functions of DVR
by using the system controller keyboard (SSC-2000).
id
Selects the ID of the system controller keyboard.
Baudrate
Selects the transmission speed of the system controller
(1200/2400/4800/9600/19200/38400).
Available system controller Keyboard
no
Manufacturer
Model name
1
SAMSUNG
SSC-2000
The items above should match the settings
of the system controller keyboard. For further
information, refer to the manual provided by the
manufacturer of the system controller keyboard.
This device supports only half duplex as a
transmission method.
monitoring
The details of the monitoring menu are as follows:
Live Mode
event Monitoring duration
It can be set to any of Off, 30 seconds, and
CONTINUE.
oFF: The event monitoring that switches to the event
screen does not operate.
30 seconds: It sets the display duration of the current
channel until the next channel is displayed.
continUe: The event monitoring screen will be
maintained until it is cancelled by pressing the
ALArM
button on the front panel.
osd
date: When it is On, the date will be displayed on the
screen. When it is Off, the date will not be displayed on
the screen.
time: When it is On, the time will be displayed on the
screen. When it is Off, the time will not be displayed on
the screen.
title: When it is On, the camera name will be displayed
on the screen. When it is Off, the camera name will not
be displayed on the screen.
state: When it is On, the Audio/PTZ will be displayed
on the screen. When it is Off, the Audio/PTZ will not be
displayed on the screen.
►
►
►
►
►
shr-5042/5040 menu
system
►
Camera
►
monitoring
►
record mode
event record
►
record schedule
Backup
network
►
move/Control
select
exit
live mode
spot mode
monitoring
event monitoring
off
duration
on
date
on
time
on
title
on
state
off
support
osd
1Ch dvr
ok
Cancel
remote Control device
ok
Cancel
id
Baudrate
0
9600
move/Control
select
exit
SHR-5042_Eng_02.indd 29
2008-01-25 오전 9:31:23