Sharp UX-B800 - Manual (Page 22)

Storing E-mail Addresses
20
Storing E-mail Addresses
You can store e-mail addresses in the
A, B, and C keys, in Rapid Keys, and in
Speed Dial numbers.
♦
An e-mail address stored in a Rapid
Key or the A, B, or C key is selected
by simply pressing that key. A total of
36 Rapid Keys are available.
(Note: Attach the Rapid Key labels as
shown on page 5.)
♦
An e-mail address stored in a Speed
Dial number is selected by pressing
and entering the 2-digit Speed
Dial number. A total of 63 Speed Dial
numbers are available.
Note: Rapid Keys and Speed Dial
numbers are also used for fax (p. 29).
Storing an e-mail address
Follow the steps below to store an e-
mail address using the machine’s
operation panel.
♦
E-mail addresses can also be stored
using the machine’s Web page. To
access the Web page, see page 18.
1 Press , , then .
2 To store an e-mail address in the A,
B, or C key, press the desired key
and go directly to Step 4.
To store an e-mail address in a
Rapid Key, press the desired Rapid
Key.
SPEED DIAL
FUNCTION
To store an e-mail address in a
Speed Dial number, press
and enter the desired 2-digit
number (01 to 63).
•
If you prefer to have the machine
suggest an available Rapid Key /
Speed Dial number at the end of the
procedure, press .
3 Press to select E-MAIL.
Display: [E-MAIL # MODE]
4 Enter the e-mail address with the
letter and number keys (max. of 128
characters).
•
For information on using the letter
keys, see page 6.
•
To clear a mistake, press .
5 Press .
6 Enter the name of the recipient
(max. 20 characters).
7 Press .
•
If you selected a Rapid Key or
Speed Dial number in Step 2, the
display will briefly show [STORED],
and then [NEW NUMBER]. Go to
Step 8.
SPEED DIAL
all.book Page 20 Thursday, August 10, 2006 2:22 PM