Sharp UX-B800 - Manual (Page 31)

Sending a Fax: Auto Dialling
29
3. Sending
Fa
x
e
s
•
If an error occurs, the machine will
beep three times and print a
Transaction Report to inform you of
the problem (p. 56).
Note: If the transmission is
unsuccessful and the display shows
[DOCUMENT JAMMED], remove the
document as explained on page 67.
Sending a Fax: Auto Dialling
You can store your most frequently
dialled fax and phone numbers in Rapid
Keys and Speed Dial numbers.
♦
A number stored in a Rapid Key is
dialled by simply pressing the Rapid
Key. A total of 36 Rapid Keys are
available. (Note: Attach the Rapid Key
labels as shown on page 5.)
♦
A number stored in a Speed Dial
number is dialled by pressing ,
the 2-digit Speed Dial number, and
then . A total of 63 Speed Dial
numbers are available.
Note: E-mail addresses can also be
stored in Rapid Keys and Speed Dial
numbers (see page 20).
SPEED DIAL
Storing fax and phone numbers
Follow the steps below to store a fax or
phone number using the machine’s
operation panel.
♦
Fax/phone numbers can also be
stored using the machine’s Web
page. To access the Web page, see
page 18.
1 Press , , then .
2 To store a number in a Rapid Key,
press the desired Rapid Key.
To store a number in a Speed Dial
number, press and enter the
desired 2-digit number (01 to 63).
Display: [SELECT DEST. TYPE]
•
If you prefer to have the machine
suggest an available Rapid Key /
Speed Dial number at the end of the
procedure, press .
3 Press to select “FAX”.
Display: [FAX # MODE]
4 Enter the fax or phone number with
the number keys (max. of 32 digits).
(Note: A space cannot be entered.)
•
To clear a mistake, press .
FUNCTION
SPEED DIAL
all.book Page 29 Thursday, August 10, 2006 2:22 PM